Improper adjustment of the cleaner is prone to powder accumulation

发布时间：2023-12-11 点击次数：

In the large corn production line milling, the clearing machine is usually used. It is a kind of grain processing machinery, mainly used to separate the pure and purer endosperm particles from the milled material after milling. The large corn production line consists of a screen body equipped with a two-way 2-layer screen surface or a double screen body equipped with 2 or 3-layer screen surface with air ducts, air chambers, etc., and each layer of the screen surface consists of 4 screen compartments equipped with different mesh screens in series. The reasonable adjustment of the cleaner has a great influence on the processing quality of large corn production line, if not properly adjusted, it is easy to accumulate powder.

　　Accumulation of more powder will seriously affect the effect of cleaning powder, reduce the processing quality of large corn production line. When there is a powder accumulation, it should be dealt with from the suction duct, suction chamber valve and make-up air holes in three aspects. Variable cross-section suction ducts such as powder accumulation, should be opened at one end or both ends of the filler holes, with a fast wind finishing, finishing the end of the filler holes adjusted back to the original degree of openness. Cyclone suction duct basic not accumulate powder, if there is an accumulation of powder, open up both ends of the complementary air holes to deal with. Most of the current use of clean powder machine is the same cross-section suction duct, easy to accumulate powder, should be often repeated to pull the suction chamber valve to organize, and then make up air holes to help deal with to ensure that the quality of large corn production line processing.