Vibrating screen in the installation of the seven precautions

发布时间：2024-01-29 点击次数：

What are the precautions when installing the vibrating screen in the corn milling complete set of equipment? We all know that the vibrating screen is indispensable in the corn milling complete sets of equipment, the following here to explain the specific precautions:   

　　1. When installing, be sure to tighten the screen mesh, because the tightness of the screen mesh is an important factor that affects the screening efficiency;.

　　2. pay attention to Definitely choose the screen mesh with thicker diameter, because the installation of linear screen mesh is relatively cumbersome.

　　3. When installing the screen ball, we must pay attention to the screening difficulty of the material and the number of mesh, not blindly installed; 4.

　　4. When cutting, the width of the corn milling equipment screen mesh and mesh frame can be maintained in line, and the length must be longer than the mesh frame by 50~70mm.

　　5. if the material specific gravity is larger or the screen mesh is higher, the mesh should be added below the screen mesh, the purpose is to play a supporting role to reduce the material pressure on the screen mesh, to extend its service life.

　　6. After the screen frame is assembled to the screen box according to the requirements, remember to extend the screen mesh into the corresponding outlet, to avoid mixing the materials here.

　　7. When installing the pressure plate in the corn milling equipment, we must pay attention to its flatness.

Must pay attention to its flatness, and lined with a strong sponge sealing tape uniform locking, because it is not only to prevent the key to the occurrence of mixed grade, but also an important factor affecting the service life of the screen.