Corn processing equipment sets of whole grinding roller requirements

发布时间：2024-04-26 点击次数：

The taper of each part of the smooth roller of the corn processing complete equipment meets the specified requirements, and the surface roughness must be uniform. After replacing the grinding roller, according to the requirements of each system of corn processing complete equipment, check with a plug ruler and roughly adjust the rolling distance of the grinding roller. Doing a good job of cleaning and maintaining the equipment is not only good for sealing or future use. The above is the relevant work that needs to be done before sealing the corn processing complete sets of equipment, even if it is not used for a long time, it will not bring losses to the corn processing complete sets of equipment.

　　When the phenomenon of high temperature of corn processing complete sets of equipment is even more important to do a good job of lubrication, generally due to the continuous production of corn processing complete sets of equipment friction, resulting in increased temperature. The bearings and motors of corn processing complete sets of equipment run fast and are more prone to friction. Staff should first cool the machine, and then do reasonable lubrication and sealing, which can effectively avoid the occurrence of major failures.

　　In addition to this, the pressure change of the fan of the maize processing complete sets of equipment will also cause the motor to heat up. We are reminded not to change the millet processing equipment arbitrarily. At the same time, the staff should remember to check whether the extension tube of the rice milling machine set is smooth, whether the viscosity of the lubricant meets the requirements, and whether the room temperature of its bearings can not exceed 80 degrees.