Stone Mill Flour Machinery Material Addition Requirements

发布时间：2025-06-25 点击次数：

　Today's stone milling flour machinery production has achieved automated production line mode, for human labour output requirements are very low, so it is very save heart, save energy. But want to guarantee the stability of production, for each process has a standard, such as the addition of materials, is one of them.

　　The speed of adding materials should be based on the manufacturer's specified speed of discharging, if the speed is too slow, it will cause a decline in production; if too fast, it may cause clogging, grinding effect is poor, the flour particles are not uniform imagination. So according to the production requirements, the type of equipment and so on to set the appropriate material adding speed, convenient production.

　　And in the operation of stone milling flour machinery, sometimes you will encounter the situation of material running away. This situation may be the stone grinding flour machinery itself sieve body is not flat, the staff need to re-gasket levelling frame, to adjust. In addition, if you find that the sieve body movement trajectory is not correct, you should pay attention to the two motors each with different excitation force, adjust one of the bias block, so that the two are the same. Do a good job in the usual checks, try to avoid the emergence of the problem, and gradually improve the efficiency of stone milling flour machinery as well as the quality of production.